Welcome to docker.ru hosting provider linux mirror located at Moscow, Russian Federation.
Server configuration: Linux with OpenZFS, 2 x E5-2670v2, 128 GB ECC memory, 12 x 4 TB raidz2 + 1 TB SSD for L2ARC.
Network: 20 gbps uplink, IPv4 (185.253.23.31), IPv6 (2a04:8580:ffff:fffe::2).
My hostname is mirror.docker.ru Fibre Channel Storage Network
Red Hat GFS 6.0: Administrator's Guide
PrevChapter 2. System RequirementsNext

2.3. Fibre Channel Storage Network

Table 2-2 shows requirements for GFS nodes that are to be connected to a Fibre Channel SAN.

RequirementDescription
HBA (Host Bus Adapter)One HBA minimum per GFS node
Connection method

Fibre Channel switch
Note: If an FC switch is used for I/O fencing nodes, you may want to consider using Brocade, McData, or Vixel FC switches, for which GFS fencing agents exist.
Note: When a small number of nodes is used, it may be possible to connect the nodes directly to ports on the storage device.
Note: FC drivers may not work reliably with FC hubs.

Table 2-2. Fibre Channel Network Requirements

PrevHomeNext
TCP/IP NetworkUpFibre Channel Storage Devices
powered by nginx